Filter By:
- Bar Ends (3)
- BMX (10)
- Bottom Brackets (56)
- Brakes/Levers/Pads (107)
- Cables (47)
- Cassettes/Freewheels (49)
- Chainrings (36)
- Chains (63)
- Show More Categories
- Cranksets (48)
- Derailleurs (58)
- Forks (8)
- Groups (7)
- Handlebar Grips/Tape (55)
- Handlebars (27)
- Headsets (23)
- Pedals (55)
- Saddles (47)
- Seatposts (19)
- Shift/Brake Combinations (13)
- Shifters (30)
- Shocks (1)
- Stems (24)
- Other (238)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
There are lots of things that make riding a bike more fun and Mead's Bike Shop has all the parts and accessories you'll need to maximize the fun. We're also ready to install, educate and dial in all the gear that keeps you going.

$0.10
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle

$0.17
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

$0.50
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

$2.00 - $42.00
- Hayes service parts for calipers
- Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

$2.50
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers

$2.99
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

$2.99
Magura olives (compression ferrule) bag/20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers

$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm

$3.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette
- Range: 4mm
- Color: Silver

$3.99 - $4.99
Can be used to provide extra clearance between brake caliper and spokes.
Spacer should be placed between rotor and hub.

$4.50
- Missing links to make chain installation, maintenance and reparation easier
- Reusable up to 3 times
- Compatible with 6, 7 and 8 speed IG drivetrains
- Pin width: 7.1mm
- Card of 2

$4.99 - $19.99
- All cables are pre-stretched
- Low-friction, slick surface cables for smooth braking action
- Can be used for road and mountain bikes
- Stainless steel kit is rust-proof
Page 1 of 34
Next page